Tire Pressure Warning Receiver(w/ Antenna)

1. REMOVE ROOF HEADLINING ASSEMBLY

(a) Remove the roof headlining assembly (See page ).

2. REMOVE TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Disconnect the connector.

(b) Remove the bolt and receiver assembly.

1. INSTALL TIRE PRESSURE WARNING ANTENNA AND RECEIVER

(a) Install the receiver assembly with the bolt.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(b) Connect the connector.

2. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the roof headlining assembly (See page ).

3. PERFORM REGISTRATION OF TRANSMITTER ID

(a) Perform registration of the transmitter ID (See page ).