Head restraints
Head restraints are provided for all seats.
Front seats and rear outboard seats
- Up
Pull the head restraint up. - Down
Push the head restraint down while pressing the lock release button.
Rear center seat
Head restraints cannot be adjusted or removed.
в– Removing the head restraints
Pull the head restraint up while pressing the lock release button.
If the head restraint touches the ceiling, making the removal difficult, change the seat back angle or, if possible, the seat height.

в– Installing the head restraints
Front seats
Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint

Rear outboard seats
Align the head restraint with the installation holes and push it down to the lowest lock position while pressing the lock release button.

в– Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

в– Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
- Use the head restraints designed for each respective seat.
- Adjust the head restraints to the correct position at all times.
- After adjusting the head restraints, push down on them and make sure they are locked in position.
- Do not drive with the head restraints removed.
(However, if a head restraint interferes with installation of a child restraint system, the head restraint can be removed to accommodate the child restraint system)