Toyota Camry Quiz
Communication system

Horn assy

In this manual: Communication system
Introduction — 61Audio & visual system — 16Automatic transmission / trans — 19Transmission revolution (ATM) — 1Shift lock system (ATM) — 1Brake — 20Clutch — 10Communication system — 4Cooling — 15Cruise control — 3Drive shaft / propeller shaft — 9Emission control — 8Engine control system — 12Engine hood/door — 7Exhaust — 3Exterior/interior trim — 14Front suspension — 9Fuel — 12Heater & air conditioner — 16Ignition — 8Instrument panel/meter — 7Intake — 7Lighting — 11Lubrication — 16Manual transmission/transaxle — 13Parking brake — 10Power steering — 7Rear suspension — 10Seat — 12Service specifications — 26Sliding roof/convertible — 4Starting & charging — 11Starting system (2AZ−FE)(From July, 2003) — 1Starting system (1MZ−FE/3MZ−FE) — 1Steering column — 6Theft deterrent & door lock — 9Tire & wheel — 4Windshield/windowglass/mirror — 5Back window glass — 1Power window control system — 1Power mirror control system — 1Inner rear view mirror assy — 1Windshield glass — 1Wiring — 1
8steps
~48min
2/5difficulty
010203040502015N·mlb·ft
Tightening torque found on this page
Done 0 of 8
REPLACEMENT 1. REMOVE HIGH PITCHED HORN ASSY

  1. Disconnect the connector.

  2. Remove the bolt and horn.

2. REMOVE LOW PITCHED HORN ASSY

  1. Disconnect the connector.

  2. Remove the bolt and horn.

3. INSTALL HIGH PITCHED HORN ASSY

  1. Place the stay onto the baffle part in the radiator support upper. Then install the horn with the bolt.

    Torque: 20 N·m

  2. Connect the connector.

4. INSTALL LOW PITCHED HORN ASSY

  1. Place the stay onto the baffle part in the radiator support upper. Then install the horn with the bolt.

    Torque: 20 N·m

  2. Connect the connector.

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.