Engine hood/door

Luggage compartment door

12steps
~72min
3/5difficulty
0102030405086N·mlb·ft
Tightening torque found on this page
Done 0 of 12
ADJUSTMENT 1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB−ASSY

a. Check that the clearance is within the standard value.

  1. REMOVE LUGGAGE COMPARTMENT DOOR COVER
  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
  3. REMOVE SPARE WHEEL COVER ASSY
  4. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB−ASSY RH
  5. REMOVE LUGGAGE COMPARTMENT TRIM HOOK No.1
  6. REMOVE REAR FLOOR FINISH PLATE
  7. ADJUST LUGGAGE COMPARTMENT DOOR PANEL SUB−ASSY
  8. For forward/rearward and right/left adjustments, loosen the bolts.

  9. For a vertical adjustment of the door front end, increase or decrease the number of the washers between the hinge and door.

  10. Tighten the bolts after adjustment.

    Torque: 8 N·m
  11. Using a hammer and a brass bar, tap the striker to adjust it.

  12. Tighten the bolts after adjustment.

    Torque: 5,5 N·m
    Luggage door hinge torsion bar

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.