Parking brake

Parking brake lever sub-assy (From August, 2002)

14steps
~84min
3/5difficulty
010203040502317N·mlb·ft
Tightening torque found on this page
Done 0 of 14
REPLACEMENT

HINT: COMPONENTS

  1. REMOVE CONSOLE PANEL UPPER
  2. REMOVE AIR DUCT REAR No.1
  3. REMOVE PARKING BRAKE LEVER SUB−ASSY
  4. Disconnect the parking brake switch connector.

  5. Remove the lock nut and adjusting nut.

  6. Remove the 2 bolts.

  7. Using a screwdriver, disconnect the parking brake cable No. 1 and remove the parking brake lever sub−assy.

Remove parking brake lever sub-assy Remove parking brake lever sub-assy 4. REMOVE PARKING BRAKE SWITCH ASSY

a. Remove the screw and parking brake switch assy.

5. INSTALL PARKING BRAKE SWITCH ASSY

a. Install the parking brake switch assy with the screw.

6. INSTALL PARKING BRAKE LEVER SUB−ASSY
  1. Connect the parking brake cable to the lever and install the adjusting nut and lock nut.

  2. Install the paking brake lever sub−assy with the 2 bolts. Torque: 23 N·m
  3. Connect the parking brake switch connector.

Install parking brake lever sub-assy Install parking brake lever sub-assy
  1. INSTALL AIR DUCT REAR No.1
  2. INSTALL CONSOLE PANEL UPPER
  3. CHECK PARKING BRAKE LEVER TRAVEL
  4. ADJUST PARKING BRAKE LEVER TRAVEL

Test yourself

A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.