Engine & Hybrid System

Battery Ecu

~1min read

READ NEXT:

Removal

REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 PRECAUTION - - - 2 WHEN REPLACING BATT

Installation

INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION) Procedure Part Name Code 1 BATTERY ECU ASSEMBLY 89890A - -

Combination Switch

InspectionINSPECTION PROCEDURE 1. INSPECT EV DRIVE MODE SWITCH (COMBINATION SWITCH ASSEMBLY) (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below

SEE MORE:

Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B (P001700)

DESCRIPTION Refer to DTC P001313. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P001700 Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B Deviation in the crankshaft position sensor signal and camshaft posi

Hybrid/EV Battery Air Temperature Sensor "A" Circuit Short to Ground (P0AAC11,P0AAC15)

DESCRIPTION The inlet air temperature sensor (HV battery) is mounted on the HV battery. The resistance of the sensor varies in accordance with changes in the intake air temperature. The characteristics of the inlet air temperature sensor are the same as those of the battery temperature sensors (Clic