Audio & Visual & Telematics

Data List / Active Test

~1min read

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

Chassis > Rear Camera > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

0 to 16777215

Same as actual total distance traveled

For the unit, refer to "Total Distance Traveled - Unit"

Total Distance Traveled - Unit

Total distance traveled unit

km or mile

km: km

mile: mile

-

Steering Angle

Steering angle

-3276.8 to 3276.7 deg

Steering left: Changes positively continuously

Steering right: Changes negative continuously

-

Vehicle Speed

Vehicle speed

0 to 655 km/h

Equivalent to actual vehicle speed

-

EPS Steering Angle Value

Calculate the current EPS rudder angle value

-3276.8 to 3276.7 deg

Steering left: Changes positively continuously

Steering right: Changes negative continuously

-

Target Steering Angle Value (SBW)

Calculate the current target steering angle value

-3276.8 to 3276.7 deg

Steering left: Changes positively continuously

Steering right: Changes negative continuously

-