Power Source & Network
Diagnosis System
In this manual: Power Source & Network
~1min read
DIAGNOSIS SYSTEM
DLC3 (Data Link Connector 3)
(a) Check the DLC3.
Click here ![]()
AUXILIARY BATTERY VOLTAGE
Standard Voltage:
Switch Condition | Specified Condition |
|---|---|
Ignition switch ON |
11 to 14 V |
- If the voltage is below 11 V, replace or recharge the auxiliary battery.
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
.gif)
Was this page helpful?