Steering
How To Proceed With Troubleshooting
In this manual: Steering
~1min read
HINT:
Use these procedures to troubleshoot the heated steering wheel system.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
|
INSPECT AUXILIARY BATTERY
(a) Measure the auxiliary battery voltage with the ignition switch off.
Standard voltage:
11 to 14 V (Ignition switch off)
If the voltage is below 11 V, replace or recharge the auxiliary battery before proceeding to the next step.
|
PROBLEM SYMPTOMS TABLE
HINT:
Refer to Problem Symptoms Table.
Click here ![]()
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |
Was this page helpful?