Audio & Visual & Telematics

Inspection

~2min read

INSPECTION

PROCEDURE

1. INSPECT FRONT CENTER ULTRASONIC SENSOR (for LH Side)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1 (BO)

Always

Below 1 Ω

5 (SI) - 2 (SO)

Always

Below 30 Ω

6 (EI) - 3 (EO)

Always

Below 1 Ω

If the result is not as specified, replace the front center ultrasonic sensor.

*a

Component without harness connected (Front Center Ultrasonic Sensor)

2. INSPECT FRONT CENTER ULTRASONIC SENSOR (for RH Side)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1 (BO)

Always

Below 1 Ω

5 (SI) - 2 (SO)

Always

Below 30 Ω

6 (EI) - 3 (EO)

Always

Below 1 Ω

If the result is not as specified, replace the front center ultrasonic sensor.

*a

Component without harness connected (Front Center Ultrasonic Sensor)

3. INSPECT FRONT CORNER ULTRASONIC SENSOR (for LH Side)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1 (BO)

Always

Below 1 Ω

5 (SI) - 2 (SO)

Always

Below 30 Ω

6 (EI) - 3 (EO)

Always

Below 1 Ω

If the result is not as specified, replace the front corner ultrasonic sensor.

*a

Component without harness connected (Front Corner Ultrasonic Sensor)

4. INSPECT FRONT CORNER ULTRASONIC SENSOR (for RH Side)

(a) Check the resistance.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

4 (BI) - 6 (EI)

Always

10 kΩ or higher

4 (BI) - 1 (BO)

Always

Below 1 Ω

5 (SI) - 2 (SO)

Always

Below 30 Ω

6 (EI) - 3 (EO)

Always

Below 1 Ω

If the result is not as specified, replace the front corner ultrasonic sensor.

*a

Component without harness connected (Front Corner Ultrasonic Sensor)