Inspection
INSPECTION
PROCEDURE
1. INSPECT FUEL PRESSURE SENSOR
(a) Check the fuel pressure sensor output voltage.
(1) Apply 5 V between terminals 1 (VC) and 2 (E2). NOTICE:
HINT: If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series. |
|
(2) Measure the voltage according to the value(s) in the table below. Standard Voltage:
*: The output voltage changes depending on the voltage applied to the terminals. If the result is not as specified, replace the fuel pressure sensor. |
|
.png)
.png)