Vehicle Exterior

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT FOG LIGHT ASSEMBLY LH

(a) Check that the fog light assembly LH.

(1) Apply auxiliary battery voltage to the fog light assembly LH and check that the light illuminates.

OK:

Tester Connection

Specified Condition

A43-1 (B) - Auxiliary battery positive (+)

A43-2 (E) - Auxiliary battery negative (-)

Fog light assembly LH comes on

If the result is not as specified, replace the fog light assembly LH.

*a

Component without harness connected

(Fog Light Assembly LH)

2. INSPECT FOG LIGHT ASSEMBLY RH

(a) Check that the fog light assembly RH.

(1) Apply auxiliary battery voltage to the fog light assembly RH and check that the light illuminates.

OK:

Tester Connection

Specified Condition

A42-1 (B) - Auxiliary battery positive (+)

A42-2 (E) - Auxiliary battery negative (-)

Fog light assembly RH comes on

If the result is not as specified, replace the fog light assembly RH.

*a

Component without harness connected

(Fog Light Assembly RH)