(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Light Control Switch
Tester Connection
Condition
Specified Condition
*1: w/ DRL OFF Switch
*2: w/ Light Control Switch OFF Position
*3: w/ DRL Switch
*4: w/ Automatic Light Control System
z17-2 (L_OFF) - z17-12 (EL)
Light control switch DRL-OFF*1
Light control switch OFF*2
Below 1 Ω
z17-10 (A) - z17-12 (EL)
Light control switch DRL position*3
Light control switch AUTO position*4
Below 1 Ω
z17-14 (T) - z17-12 (EL)
Light control switch in tail position
Below 1 Ω
z17-5 (H) - z17-12 (EL)
Light control switch in head position
Below 1 Ω
Dimmer Passing Switch
Tester Connection
Condition
Specified Condition
z17-6 (HF) - z17-12 (EL)
Dimmer switch in flash position
Below 1 Ω
z17-1 (HU) - z17-12 (EL)
Dimmer switch in high position
Below 1 Ω
Fog Light Switch (w/ Fog Light)
Tester Connection
Condition
Specified Condition
z17-4 (BFG) - z17-12 (EL)
Fog light switch off
10 kΩ or higher
z17-4 (BFG) - z17-12 (EL)
Fog light switch on
Below 1 Ω
Turn Signal Switch
Tester Connection
Condition
Specified Condition
z17-9 (TR) - z17-12 (EL)
Turn signal switch in neutral position
10 kΩ or higher
z17-3 (TL) - z17-12 (EL)
Turn signal switch in neutral position
10 kΩ or higher
z17-9 (TR) - z17-12 (EL)
Turn signal switch in right turn position
Below 1 Ω
z17-9 (TR) - z17-12 (EL)
Turn signal switch in full right turn position
Below 1 Ω
z17-9 (TR) - z17-11 (CR)
Turn signal switch in full right turn position
Below 1 Ω
z17-11 (CR) - z17-12 (EL)
Turn signal switch in full right turn position
Below 1 Ω
z17-3 (TL) - z17-12 (EL)
Turn signal switch in left turn position
Below 1 Ω
z17-3 (TL) - z17-12 (EL)
Turn signal switch in full left turn position
Below 1 Ω
z17-3 (TL) - z17-11 (CR)
Turn signal switch in full left turn position
Below 1 Ω
z17-11 (CR) - z17-12 (EL)
Turn signal switch in full left turn position
Below 1 Ω
HINT:
The left turn or right turn condition indicates a condition in which the turn signal switch will return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated approximately 6.3°).
The full left turn or full right turn condition indicates a condition in which the turn signal switch will not return to the neutral position after releasing your hand from the turn signal switch (turn signal switch is operated 10.5°).
If the result is not as specified, replace the turn signal switch.