Vehicle Exterior

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT REAR LIGHT LENS AND BODY LH (for LED Type Clearance Light)

(a) Check that the rear light lens and body LH.

(1) Apply auxiliary battery voltage to the rear light lens and body LH and check that the light comes on.

OK:

Tester Connection

Specified Condition

U44-1 (B) - Auxiliary battery positive (+)

U44-2 (E) - Auxiliary battery negative (-)

Tail light comes on

If the result is not as specified, replace the rear light lens and body LH.

*a

Component without harness connected

(Rear Light Lens and Body LH)

2. INSPECT REAR LIGHT LENS AND BODY RH (for LED Type Clearance Light)

(a) Check that the rear light lens and body RH.

(1) Apply auxiliary battery voltage to the rear light lens and body RH and check that the light comes on.

OK:

Tester Connection

Specified Condition

U43-1 (B) - Auxiliary battery positive (+)

U43-2 (E) - Auxiliary battery negative (-)

Tail light comes on

If the result is not as specified, replace the rear light lens and body RH.

*a

Component without harness connected

(Rear Light Lens and Body RH)