Vehicle Exterior

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

(a) Check that the side turn signal light assembly LH.

(1) Apply auxiliary battery voltage to the side turn signal light assembly LH and check that the light comes on.

OK:

Tester Connection

Specified Condition

L-2 - Auxiliary battery positive (+)

L-1 - Auxiliary battery negative (-)

Side turn signal light LH comes on

If the result is not as specified, replace the side turn signal light assembly LH.

*a

Component without harness connected

(Side Turn Signal Light Assembly LH)

2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

(a) Check that the side turn signal light assembly RH.

(1) Apply auxiliary battery voltage to the side turn signal light assembly RH and check that the light comes on.

OK:

Tester Connection

Specified Condition

K-2 - Auxiliary battery positive (+)

K-1 - Auxiliary battery negative (-)

Side turn signal light RH comes on

If the result is not as specified, replace the side turn signal light assembly RH.

*a

Component without harness connected

(Side Turn Signal Light Assembly RH)