Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
BLIND SPOT MONITOR SENSOR LH |
88172 |
- |
- |
- |
2 |
BLIND SPOT MONITOR SENSOR RH |
88162 |
- |
- |
- |
3 |
PERFORM BLIND SPOT MONITOR SENSOR INSTALLATION CONDITION INSPECTION |
- |
- |
- |
|
4 |
REAR BUMPER ASSEMBLY |
- |
- |
- |
- |
5 |
BSM ECU DATE WRITE |
- |
- |
- |
|
6 |
PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION |
- |
- |
- |
|
7 |
PERFORM DIAGNOSTIC SYSTEM CHECK |
- |
- |
- |
|
NOTICE:
- Avoid any impact to the blind spot monitor sensor.
- Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.
HINT:
- The blind spot monitor beam axis inspection is performed to confirm whether the sensor is transmitting radio waves.
- The blind spot monitor beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using reflector.
- The blind spot monitor sensor installation condition inspection is performed to confirm whether the sensor is placed vertically to the ground (+/-5°) by using a jig, and that the sensor is 16 to 24° from the line parallel to the vehicle center line.
PROCEDURE
1. INSTALL BLIND SPOT MONITOR SENSOR LH
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
2. INSTALL BLIND SPOT MONITOR SENSOR RH
3. PERFORM BLIND SPOT MONITOR SENSOR INSTALLATION CONDITION INSPECTION
Click here ![]()
4. INSTALL REAR BUMPER ASSEMBLY
- except Sport Package:
Click here
.gif)
- for Sport Package:
Click here
.gif)
5. BSM ECU DATE WRITE
NOTICE:
BSM ECU data write can only be performed when the beam axis adjustment value is able to be saved to the GTS.
Click here ![]()
6. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION
NOTICE:
When BSM ECU data write can be performed, it is possible to omit the blind spot monitor beam axis confirmation.
Click here ![]()
7. PERFORM DIAGNOSTIC SYSTEM CHECK
Click here ![]()
.png)
.png)
.png)