Drivetrain
Installation
In this manual: Drivetrain
~1min read
1special tools
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
TRANSFER ASSEMBLY |
36100 |
- |
- |
|
2 |
CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY |
30400 |
- |
- |
- |
![]() |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) |
* |
For use with SST |
PROCEDURE
1. INSTALL TRANSFER ASSEMBLY
*a |
Torque Wrench Fulcrum Length |
- |
- |
(1) Using SST, install the transfer assembly to the continuously variable transaxle assembly with the 8 nuts.
SST: 09729-00170
Torque:
Specified Tightening Torque :
69 N·m {700 kgf·cm, 51 ft·lbf}
HINT:
- Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click here
.gif)
- When using SST (fulcrum length of 200 mm (7.87 in.)) + torque wrench (fulcrum length of 255 mm (10.04 in.)): 38.4 N*m (392 kgf*cm, 28 ft.*lbf)
2. INSTALL CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY
Click here
![]()
Was this page helpful?
.png)
.png)
.png)
.png)