Drivetrain

Installation

~1min read
01020304050107N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

MOTOR CABLE

G1148

-

-

2

TERMINAL CAP

82823M

-

-

3

INVERTER WITH CONVERTER ASSEMBLY

G92A0

-

-

-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)

N*m (kgf*cm, ft.*lbf): Specified torque

PROCEDURE

1. INSTALL MOTOR CABLE

CAUTION:

Be sure to wear insulated gloves.

NOTICE:

  • Keep the motor cable terminals and their installation area free from foreign matter, water, etc.
  • To prevent the threads from being damaged, temporarily tighten the 6 bolts by hand.
  • Do not touch the waterproof seal or terminals of the motor cable.
  • Do not damage the terminals, connector housing or hybrid vehicle transaxle assembly during connection.

*a

Waterproof Seal

-

-

(1) Using an insulated tool, install the motor cable to the hybrid vehicle transaxle assembly with the 6 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

2. INSTALL TERMINAL CAP

CAUTION:

Be sure to wear insulated gloves.

NOTICE:

  • Keep the terminal cap and its installation area free from foreign matter, water, etc.
  • Do not touch the waterproof seal or terminals of the motor cable.

*a

Waterproof Seal

-

-

(1) Temporarily install the terminal cap to the hybrid vehicle transaxle assembly with the 2 bolts.

(2) Tighten the 2 bolts to install the terminal cap.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

3. INSTALL INVERTER WITH CONVERTER ASSEMBLY

Click here