Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
DIFFERENTIAL SIDE GEAR SHAFT DUST COVER LH |
41336M |
- |
- |
|
2 |
DIFFERENTIAL SIDE GEAR SHAFT DUST COVER RH |
41336L |
- |
- |
|
3 |
DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY LH |
41309L |
- |
- |
|
4 |
DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY RH |
41309K |
- |
- |
|
5 |
REAR DRIVE SHAFT ASSEMBLY |
- |
- |
- |
- |
6 |
ADD HYBRID TRANSAXLE FLUID |
- |
- |
- |
|
7 |
INSPECT HYBRID TRANSAXLE FLUID |
- |
- |
- |
|
8 |
INSPECT FOR HYBRID TRANSAXLE FLUID LEAK |
- |
- |
- |
|
● |
Non-reusable part |
- |
- |
PROCEDURE
1. INSTALL DIFFERENTIAL SIDE GEAR SHAFT DUST COVER LH
![]() |
NOTICE:
|
*a |
Press |
*b |
Steel Plate |
(1) Using SST, a steel plate and press, install a new differential side gear shaft dust cover LH to the differential side gear shaft sub-assembly LH.
SST: 09316-20011
SST: 09527-20011
2. INSTALL DIFFERENTIAL SIDE GEAR SHAFT DUST COVER RH
3. INSTALL DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY LH
*a |
Less than 421.1 mm (1.38 ft.) |
- |
- |
(1) Using a brass bar and hammer, install a new snap ring to the differential side gear shaft sub-assembly LH.
(2) Using SST, install the differential side gear shaft sub-assembly LH to the rear traction motor with transaxle assembly.
SST: 09520-24010
09520-04010
09520-32040
NOTICE:
- Position the snap ring with its end gap facing downward.
- Do not install the differential side gear shaft sub-assembly LH at an angle. If the differential side gear shaft sub-assembly LH is installed at an angle, replace the snap ring with a new one.
- Do not damage the differential side gear shaft LH type T oil seal.
(3) Measure the distance between the right differential side gear shaft sub-assembly and left differential side gear shaft sub-assembly as shown in the illustration.
Standard Distance:
Less than 471.4 mm (1.55 ft.)
4. INSTALL DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY RH
5. INSTALL REAR DRIVE SHAFT ASSEMBLY
Click here ![]()
6. ADD HYBRID TRANSAXLE FLUID
Click here ![]()
7. INSPECT HYBRID TRANSAXLE FLUID
Click here ![]()
8. INSPECT FOR HYBRID TRANSAXLE FLUID LEAK
Click here ![]()
.png)
.png)
.png)
.gif)