Engine & Hybrid System
Installation
In this manual: Engine & Hybrid System
~1min read
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
WATER INLET WITH THERMOSTAT SUB-ASSEMBLY |
16031 |
- |
- |
|
2 |
ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING) |
16032 |
- |
- |
- |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![]()
PROCEDURE
1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
(1) Install a new gasket to the water inlet with thermostat sub-assembly.
(2) Using an 8 mm socket wrench, install the water inlet with thermostat sub-assembly with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
2. INSTALL ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING)
Click here ![]()
Was this page helpful?
.png)
.png)
.png)
.gif)
.png)