Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
SET EGR VALVE ASSEMBLY |
25620 |
- |
- |
|
2 |
NO. 8 WATER BY-PASS HOSE |
16296 |
- |
- |
- |
3 |
NO. 4 WATER BY-PASS HOSE |
16281 |
- |
- |
- |
4 |
EGR COOLER ASSEMBLY |
25680 |
- |
- |
- |
5 |
INSTALL EGR VALVE ASSEMBLY |
25620 |
- |
- |
|
6 |
EGR INLET GASKET |
25628 |
- |
- |
- |
7 |
EGR VALVE ADAPTER GASKET |
25629 |
- |
- |
- |
8 |
NO. 1 EGR PIPE SUB-ASSEMBLY |
25601 |
- |
- |
|
9 |
INSPECT FOR COOLANT LEAK |
- |
- |
- |
|
10 |
INSPECT FOR EXHAUST GAS LEAK |
- |
- |
- |
|
11 |
PERFORM INITIALIZATION |
- |
- |
- |
|
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![]()
PROCEDURE
1. SET EGR VALVE ASSEMBLY
![]() |
NOTICE: Perform "Inspection After Repair" after replacing the EGR valve assembly. Click here |
(1) Set the EGR valve assembly to the camshaft housing.
HINT:
At this time, do not install the parts with bolts.
2. CONNECT NO. 8 WATER BY-PASS HOSE
3. CONNECT NO. 4 WATER BY-PASS HOSE
4. INSTALL EGR COOLER ASSEMBLY
Click here ![]()
5. INSTALL EGR VALVE ASSEMBLY
(1) Using the 8 mm socket wrench, install the EGR valve assembly with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
6. INSTALL EGR INLET GASKET
7. INSTALL EGR VALVE ADAPTER GASKET
8. INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY
(1) Using an 8 mm socket wrench, install the No. 1 EGR pipe sub-assembly to the intake manifold and EGR valve assembly with the 4 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(2) Connect the EGR valve assembly connector.
9. INSPECT FOR COOLANT LEAK
Click here ![]()
10. INSPECT FOR EXHAUST GAS LEAK
Click here ![]()
11. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing the EGR valve assembly.
Click here ![]()
.png)
.png)
.png)
.gif)
.png)