Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
NO. 1 ECM BRACKET |
89667E |
- |
- |
- |
2 |
NO. 2 ECM BRACKET |
89668 |
- |
- |
- |
3 |
ECM |
89661 |
- |
- |
|
4 |
ENGINE WIRE |
82121 |
- |
- |
|
5 |
NO. 1 RELAY BLOCK COVER |
82662A |
- |
- |
- |
6 |
AIR CLEANER CASE SUB-ASSEMBLY |
17701 |
- |
- |
- |
7 |
AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
17801 |
- |
- |
- |
8 |
AIR CLEANER CAP WITH AIR CLEANER HOSE |
- |
- |
- |
|
9 |
INLET NO. 1 AIR CLEANER |
17751 |
- |
- |
- |
10 |
CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL |
- |
- |
- |
- |
11 |
VEHICLE IDENTIFICATION NUMBER (VIN) OR FRAME NUMBER REGISTRATION |
- |
- |
- |
|
12 |
UPDATE ECU SECURITY KEY |
- |
- |
- |
|
13 |
INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL |
- |
- |
- |
|
14 |
PERFORM INITIALIZATION |
- |
- |
- |
|
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
NOTICE:
- After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
- After replacing the ECM, make sure to perform vehicle identification number (vin) or frame number registration, update ECU security key.
PROCEDURE
1. INSTALL NO. 1 ECM BRACKET
Torque:
4,5 N·m {46 kgf·cm, 40 in·lbf}
2. INSTALL NO. 2 ECM BRACKET
Torque:
4,5 N·m {46 kgf·cm, 40 in·lbf}
3. INSTALL ECM
![]() |
NOTICE: If the ECM has been struck or dropped, replace it. |
Torque:
Bolt :
12,5 N·m {127 kgf·cm, 9 ft·lbf}
Nut :
8 N·m {82 kgf·cm, 71 in·lbf}
4. INSTALL ENGINE WIRE
*1 |
Grommet |
- |
- |
(1) Install the grommet.
(2) Engage the wire harness clamp and install the engine wire with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(3) Connect the 2 ECM connectors and lower the 2 lock levers.
NOTICE:
- When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.
- Be sure to securely connect the ECM connectors.
(4) Engage the 2 claws to connect the engine wire to the No. 1 engine room relay block and No. 1 junction block assembly.
(5) Connect the 3 connectors to the No. 1 engine room relay block and No. 1 junction block assembly.
5. INSTALL NO. 1 RELAY BLOCK COVER
6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
Torque:
4 N·m {41 kgf·cm, 35 in·lbf}
7. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Click here ![]()
8. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
![]() |
Click here |
9. INSTALL INLET NO. 1 AIR CLEANER
Click here ![]()
10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Click here ![]()
11. VEHICLE IDENTIFICATION NUMBER (VIN) OR FRAME NUMBER REGISTRATION
Click here ![]()
12. UPDATE ECU SECURITY KEY
Click here ![]()
13. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click here ![]()
14. PERFORM INITIALIZATION
Click here ![]()
.png)
.png)
.png)
.gif)
.png)