Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
ENGINE COOLANT TEMPERATURE SENSOR |
89422A |
- |
- |
|
2 |
AUXILIARY BATTERY CLAMP SUB-ASSEMBLY |
74404A |
- |
- |
- |
3 |
AUXILIARY BATTERY |
- |
- |
- |
- |
4 |
ECM |
89661 |
- |
- |
- |
5 |
ADD ENGINE COOLANT |
- |
- |
- |
|
6 |
INSPECT FOR COOLANT LEAK |
- |
- |
- |
|
7 |
PERFORM INITIALIZATION |
- |
- |
- |
|
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
PROCEDURE
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
![]() |
HINT: Perform "Inspection After Repair" after replacing the engine coolant temperature sensor. Click here |
(1) Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
(2) Install the engine coolant temperature sensor to the water outlet with a new clip.
NOTICE:
- If the engine coolant temperature sensor has been struck or dropped, replace it.
- If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
(3) Connect the engine coolant temperature sensor connector.
2. INSTALL AUXILIARY BATTERY CLAMP SUB-ASSEMBLY
Click here ![]()
3. INSTALL AUXILIARY BATTERY
Click here
![]()
4. INSTALL ECM
Click here
![]()
5. ADD ENGINE COOLANT
Click here ![]()
6. INSPECT FOR COOLANT LEAK
Click here ![]()
7. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Click here ![]()
.png)
.png)
.png)
.gif)
.png)