Engine & Hybrid System
Installation
In this manual: Engine & Hybrid System
~1min read
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FUEL SENDER GAUGE ASSEMBLY |
83320 |
- |
- |
|
2 |
FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY |
77020A |
- |
- |
- |
*1 |
FUEL GAUGE BRACKET |
- |
- |
PROCEDURE
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
(1) Engage the 2 claws to install the fuel sender gauge assembly to the fuel gauge bracket.
(2) Engage the 2 claws to install the fuel gauge bracket with the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.
NOTICE:
Be careful not to bend the arm of the fuel sender gauge assembly.
(3) Engage the 3 clamps to connect the wire harness to the fuel suction tube with pump and gauge assembly.
NOTICE:
- Do not damage the wire harness.
- When engaging each wire harness to the clamp, engage one wire at a time.
(4) Connect the fuel sender gauge assembly connector.
2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Click here
![]()
Was this page helpful?
.png)
.png)
.png)
.gif)