Engine & Hybrid System

Installation

~1min read
01020304050107N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

ENGINE OIL LEVEL SENSOR

89491

-

-

2

OIL PAN SUB-ASSEMBLY

12101

-

-

3

ADD ENGINE OIL

-

-

-

4

INSPECT FOR ENGINE OIL LEAK

-

-

-

5

CHECK ENGINE OIL LEVEL

-

-

-

6

NO. 1 ENGINE UNDER COVER ASSEMBLY

51410

-

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE

1. INSTALL ENGINE OIL LEVEL SENSOR

(1) Using an 8 mm socket wrench, install the engine oil level sensor to the stiffening crankcase assembly with the 2 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

(2) Install a new clip to the engine oil level sensor.

(3) Connect the engine oil level sensor connector.

2. INSTALL OIL PAN SUB-ASSEMBLY

Click here

3. ADD ENGINE OIL

Click here

4. INSPECT FOR ENGINE OIL LEAK

Click here

5. CHECK ENGINE OIL LEVEL

Click here

6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here