Engine & Hybrid System

Installation

~1min read
1special tools

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

TIMING CHAIN COVER OIL SEAL

11301C

-

-

2

CRANKSHAFT PULLEY ASSEMBLY

13470

-

-

3

INSPECT FOR ENGINE OIL LEAK

-

-

-

4

REAR ENGINE UNDER COVER RH

51443C

-

-

-

5

NO. 1 ENGINE UNDER COVER ASSEMBLY

51410

-

-

-

6

WHEEL ASSEMBLY

-

-

-

-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

-

-

PROCEDURE

1. INSTALL TIMING CHAIN COVER OIL SEAL

*a

0 to 2 mm

-

-

(1) Apply MP grease to the lip of a new timing chain cover oil seal.

NOTICE:

  • Keep the lip free from foreign matter.
  • Do not allow MP grease to contact the dust seal.

(2) Using SST and a hammer, tap in the timing chain cover oil seal.

SST: 09223-00010

Standard Depth:

0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing chain cover assembly)

NOTICE:

Do not tap in the timing chain cover oil seal at an angle.

2. INSTALL CRANKSHAFT PULLEY ASSEMBLY

Click here

3. INSPECT FOR ENGINE OIL LEAK

Click here

4. INSTALL REAR ENGINE UNDER COVER RH

Click here

5. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here

6. INSTALL WHEEL ASSEMBLY

Click here