Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
PORT FUEL INJECTOR ASSEMBLY |
23250F |
- |
- |
|
2 |
NO. 5 ENGINE WIRE |
82125N |
- |
- |
- |
3 |
INJECTOR VIBRATION INSULATOR |
23291 |
- |
- |
- |
4 |
FUEL DELIVERY SPACER |
23891 |
- |
- |
- |
5 |
FUEL DELIVERY PIPE SUB-ASSEMBLY |
23807 |
- |
- |
|
6 |
FUEL TUBE SUB-ASSEMBLY |
23910A |
- |
- |
|
7 |
FUEL PIPE CLAMP |
23841K |
- |
- |
- |
8 |
PERFORM INITIALIZATION |
- |
- |
- |
|
![]() |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here ![]()
PROCEDURE
1. INSTALL PORT FUEL INJECTOR ASSEMBLY
![]() |
NOTICE: Perform "Inspection After Repair" after replacing a port fuel injector assembly. Click here |
*a |
Stopper |
*b |
Claw |
(1) Apply a light coat of spindle oil or gasoline to 4 new O-rings, and install one to each port fuel injector assembly.
NOTICE:
Check that there is no damage or foreign matter on the groove of the port fuel injector assembly when installing the O-ring to each port fuel injector assembly.
(2) Install the 4 port fuel injector assemblies to the fuel delivery pipe sub-assembly.
NOTICE:
- Make sure that the port fuel injector assembly is located within the stopper as shown in the illustration.
- Check that the port fuel injector assembly installation holes of the fuel delivery pipe sub-assembly are not damaged and are free of foreign matter.
- Make sure that the O-ring is not damaged, twisted or moved out of place when installing the port fuel injector assembly.
2. INSTALL NO. 5 ENGINE WIRE
3. INSTALL INJECTOR VIBRATION INSULATOR
4. INSTALL FUEL DELIVERY SPACER
5. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY
(1) Place the fuel delivery pipe sub-assembly with the 4 port fuel injector assemblies onto the cylinder head sub-assembly.
NOTICE:
Be careful not to drop the port fuel injector assemblies when installing the fuel delivery pipe sub-assembly.
(2) Install the fuel delivery pipe sub-assembly with the port fuel injector assemblies with the 2 bolts.
Torque:
28 N·m {291 kgf·cm, 21 ft·lbf}
(3) Connect the No. 5 engine wire connector.
6. CONNECT FUEL TUBE SUB-ASSEMBLY
(1) Connect the fuel tube sub-assembly to the fuel delivery pipe sub-assembly.
Click here ![]()
7. INSTALL FUEL PIPE CLAMP
8. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing a port fuel injector assembly.
Click here ![]()
.png)
.png)
.png)
.gif)
.png)