Vehicle Exterior

Installation

~1min read

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

FRONT BUMPER ASSEMBLY

-

-

-

2

FRONT FENDER MOULDING SUB-ASSEMBLY LH

75602A

-

-

-

3

FRONT FENDER MOULDING SUB-ASSEMBLY RH

75601A

-

-

-

PROCEDURE

1. INSTALL FRONT BUMPER ASSEMBLY

(1) Install the 2 grommets.

(2) Engage the guide to temporarily install the front bumper assembly.

*A

w/ Fog Light

-

-

(1) Install the 2 screws and bolt.

(2) Connect the 2 connectors.

(3) w/ Fog Light:

1. Pull back the side of the front bumper assembly.

NOTICE:

Do not apply excessive force when pulling back the front bumper assembly.

2. Engage the clamps and connect the 2 connectors.

Install in this Direction

-

-

(1) Engage the claws as shown in the illustration.

(2) Install the 2 clips.

(1) Install the 10 screws.

(2) Remove the protective tape.

2. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH

3. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH