Engine & Hybrid System

On-vehicle Inspection

~1min read

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

(a) Connect the GTS to the DLC3.

(b) Start the engine.

(c) Turn the GTS on.

(d) Enter the following menus: Powertrain / Engine / Active Test / Control the Exhaust VVT OCV Duty Ratio Bank 1.

Powertrain > Engine > Active Test

Control the Exhaust VVT OCV Duty Ratio Bank 1

(e) According to the display on the GTS, perform the Active Test and check the engine speed while operating the cam timing oil control solenoid assembly.

Standard Condition:

GTS Operation

Engine Condition

0%

Normal engine speed

100%

Engine idles roughly or stalls

HINT:

Refer to "Data List / Active Test" [Exhaust VVT Hold Learn Value Bank 1, Exhaust VVT Change Angle Bank 1, Exhaust VVT OCV Control Duty Ratio Bank 1 and Exhaust VVT Target Angle Bank 1].

Click here

If the result is not as specified, check the cam timing oil control solenoid assembly, wire harness and ECM.