Precaution
PRECAUTION
PRECAUTIONS FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL
NOTICE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here
.gif)
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
.gif)
PRECAUTION FOR REPLACING PART
(a) If any of the following procedures are performed, the settings of the My Settings System will be cleared as shown in the following table.
Part Replaced or Procedure Performed | Cleared Settings |
|
|---|---|---|
Electrical key transmitter sub-assembly | Bluetooth device*1 |
|
Replace the main body ECU (multiplex network body ECU) |
● |
- |
Replace the certification ECU (smart key ECU assembly) |
● |
- |
Replace the radio and display receiver assembly |
- |
● |
Erase the electrical key transmitter sub-assembly |
● |
- |
- *1: for Vehicles which display the assigned settings of Bluetooth devices on the multi-display
(b) After replacing the radio and display receiver assembly, the radio and display receiver assembly may not reflect the driver settings even if the My Settings system identifies the user.
For vehicles that need an application or account for driver settingsItem | Description |
|---|---|
Conditions |
The radio and display receiver assembly is replaced when the electrical key transmitter sub-assembly or is set as the My Settings device. |
Symptoms |
|
Action |
By performing the following, driver information / multimedia settings can be reflected to the vehicle.
NOTICE: By following the procedure, the assigned settings of the My Settings device (electrical key transmitter sub-assembly) will be cleared. |
Item | Description |
|---|---|
Conditions |
The radio and display receiver assembly is replaced when the electrical key transmitter sub-assembly or is set as the My Settings device. |
Symptoms |
Although an electrical key transmitter sub-assembly is set as a My Settings device, the name of the driver is blank. |
Action |
Method of action before replacing the radio and display receiver assembly
Method of action after replacing the radio and display receiver assembly
NOTICE: By following the procedure, the assigned settings of the My Settings device (electrical key transmitter sub-assembly) will be cleared. |
PRECAUTION FOR REGISTRATION
(a) Before replacing the main body ECU (multiplex network body ECU), the certification ECU (smart key ECU assembly), the electrical key transmitter sub-assembly, refer to Service Bulletin.