Vehicle Exterior

Reassembly

~2min read

REASSEMBLY

COMPONENTS (REASSEMBLY)

Procedure

Part Name Code

1

QUARTER PILLAR PAD

62232A

-

-

-

*1

QUARTER PILLAR COVER

-

-

●

Non-reusable part

-

-

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL QUARTER PILLAR PAD

NOTICE:

When installing a new quarter pillar pad, heat the quarter pillar cover using a heat light.

Standard:

Item

Temperature

Quarter Pillar Cover

20 to 30 °C

CAUTION:

  • Do not touch the heat light and heated parts.
  • Touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

*a

Heated Part

*b

Heat Light

NOTICE:

Do not heat the quarter pillar cover excessively.

*a

Lib

*b

Double-sided Tape

(1) Clean the quarter pillar cover.

1. Using a heat light, heat the quarter pillar cover surface.

2. Remove any remaining double-sided tape from the quarter pillar cover.

3. Wipe off any tape adhesive residue with cleaner.

NOTICE:

  • Installing the quarter pillar pad with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.
  • Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.

(2) Install a new quarter pillar pad.

1. Using a heat light, heat the quarter pillar cover.

2. Remove the release paper from the quarter pillar pad.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

3. Install the quarter pillar pad as shown in the illustration.

HINT:

  • Install the quarter pillar pad along the lib on the quarter pillar cover.
  • Press the quarter pillar pad firmly to install it.