Engine & Hybrid System
Removal
In this manual: Engine & Hybrid System
~1min read
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
NO. 1 ENGINE UNDER COVER ASSEMBLY |
51410 |
- |
- |
- |
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
2 |
DRAIN ENGINE OIL |
- |
- |
- |
|
3 |
OIL PAN SUB-ASSEMBLY |
12101 |
- |
- |
|
4 |
ENGINE OIL LEVEL SENSOR |
89491 |
- |
- |
|
● |
Non-reusable part |
- |
- |
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here ![]()
PROCEDURE
1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here ![]()
2. DRAIN ENGINE OIL
Click here ![]()
3. REMOVE OIL PAN SUB-ASSEMBLY
![]() |
Click here |
4. REMOVE ENGINE OIL LEVEL SENSOR
![]() |
Remove in this Direction |
- |
- |
(1) Disconnect the engine oil level sensor connector.
(2) Remove the clip from the engine oil level sensor.
(3) Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from the engine balancer assembly.
Was this page helpful?
.png)
.png)
.png)
.gif)
.png)