Suspension

Removal

~1min read

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

ROOF SIDE INNER GARNISH ASSEMBLY LH

62480A

-

-

-

2

TIRE PRESSURE WARNING ECU AND RECEIVER

897B0A

-

-

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire pressure warning ECU and receiver removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Tire pressure warning ECU and receiver

  • ID Registration
  • Initialization
  • Tire Position Identification

Tire Pressure Warning System

NOTICE:

When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.

Click here

PROCEDURE

1. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

Click here

2. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:

  • Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
  • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.