Vehicle Exterior
Removal
In this manual: Vehicle Exterior
~1min read
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT BUMPER ASSEMBLY |
- |
- |
- |
- |
2 |
WASHER INLET SUB-ASSEMBLY |
85301 |
- |
- |
- |
3 |
HEADLIGHT ASSEMBLY |
- |
- |
- |
|
*A |
for RH Side |
- |
- |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
- for Sport Package:
Click here
.gif)
- except Sport Package:
Click here
.gif)
2. SEPARATE WASHER INLET SUB-ASSEMBLY (for RH Side)
3. REMOVE HEADLIGHT ASSEMBLY
*A |
w/o AFS |
*B |
w/ AFS |
![]() |
Remove in this Direction |
- |
- |
(1) Apply protective tape around the headlight assembly as shown in the illustration.
(2) w/o AFS:
1. Disengage the clamps to disconnect the 2 connectors.
(3) w/ AFS:
1. Disengage the clamps to disconnect the connector.
2. Disengage the claw to disconnect the connector as shown in the illustration.
(4) Remove the bolt and 3 screws.
(5) Remove the headlight assembly as shown in the illustration.
Was this page helpful?
.png)
.png)
.png)
.png)