Vehicle Exterior

Removal

~1min read

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

DECK TRIM SIDE PANEL ASSEMBLY

64740C

-

-

-

2

ROOF SIDE INNER GARNISH ASSEMBLY LH

62480A

-

-

-

3

QUARTER WINDOW ASSEMBLY

62720A

-

-

●

Non-reusable part

-

-

NOTICE:

Make sure to use Toyota Genuine Windshield Glass Adhesive (High Modulus Type) or equivalent.

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE DECK TRIM SIDE PANEL ASSEMBLY

Click here

2. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

Click here

3. REMOVE QUARTER WINDOW ASSEMBLY

*a

Piano Wire

*b

Clip

(1) Apply protective tape to the area around the installation position of the quarter window assembly on the vehicle body to prevent it from being scratched as shown in the illustration.

(2) Using piano wire, cut the adhesive by the below procedure.

1. Pass a piano wire between the vehicle body and quarter window assembly from the interior.

2. Tie both wire ends to wooden blocks or similar objects that can serve as handles.

3. Cut the adhesive by pulling the piano wire around the quarter window assembly.

NOTICE:

When separating the quarter window assembly, be careful not to damage the paint or interior and exterior ornaments.

(3) Using suction cups, disengage the clips to remove the quarter window assembly.

NOTICE:

Be careful not to drop the quarter window assembly.