Vehicle Interior

Seat Heater Switch

~1min read

Removal

REMOVAL

Procedure

Part Name Code

1

SWITCH BASE

55449D

-

-

-

2

REMOVE SEAT HEATER SWITCH

84751F

-

-

PROCEDURE

1. REMOVE SWITCH BASE

2. REMOVE SEAT HEATER SWITCH (for LH Side)

(1) Using a screwdriver with its tip wrapped with protective tape, disengage the claws and remove the steering heater switch.

Inspection

INSPECTION

PROCEDURE

1. INSPECT SEAT HEATER SWITCH (for LH Side)

(a) Inspect the illumination operation.

(1) Apply auxiliary battery voltage to the seat heater switch connector, and check that the seat heater switch LED illuminates.

OK:

Auxiliary Battery Connection

Specified Condition

If the result is not as specified, replace the seat heater switch.

Auxiliary battery positive (+) → I210-5 (ILL+)

Auxiliary battery negative (-) → I210-2 (ILL-)

LED illuminates

*a

Component without harness connected

(Seat Heater Switch)

2. INSPECT SEAT HEATER SWITCH (for RH Side)

(a) Inspect the illumination operation.

(1) Apply auxiliary battery voltage to the seat heater switch connector, and check that the seat heater switch LED illuminates.

OK:

Auxiliary Battery Connection

Specified Condition

If the result is not as specified, replace the seat heater switch.

Auxiliary battery positive (+) → I209-5 (ILL+)

Auxiliary battery negative (-) → I209-2 (ILL-)

LED illuminates

*a

Component without harness connected

(Seat Heater Switch)

Installation

INSTALLATION

Procedure

Part Name Code

1

INSTALL SEAT HEATER SWITCH

84751F

-

-

-

2

SWITCH BASE

55449D

-

-

-

PROCEDURE

1. INSTALL SEAT HEATER SWITCH (for LH Side)

2. INSTALL SWITCH BASE