Vehicle status information and indicators

Settings display

~2min read

■ Meter display settings that can be changed

  • Language

Select to change the language displayed.

  • Units

Select to change the units of measure displayed.

  • Meter Type

Select to change the meter type.

  • Dial Type

Select to change the display of the speedometer or tachometer.

  • Eco Driving Indicator Light

Select to enable/disable the Eco Driving Indicator Light.

Fuel economy display

Select to change the average fuel consumption display to any of the following: trip average/total average/ tank average.

Select to display/not display the audio system linked display.

Select to change the displayed content of the following:

  • Drive information type

Select to change the drive information type display between trip information/ total information.

  • Drive information items

Select to set the first and second items of the drive information display to any of the following: average vehicle speed/distance/elapsed time.

  • Pop-up display

Select to enable/disable pop-up displays for each relevant system.

  • Multi-information display off

Select to turn the multi-information display off.

To turn the multi-information display on again, press any of the following meter control switches

.

  • Default setting

Select to reset the meter display settings to the default setting.

■Suspension of the settings display

  • Some settings cannot be changed while driving. When changing settings, park the vehicle in a safe place.
  • If a warning message is displayed, operation of the settings display will be suspended.

WARNING

■Cautions during setting up the display

If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventilation.

In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.

This may lead to death or a serious health hazard.

NOTICE

■During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.