Vehicle Exterior

Terminals Of Ecu

~1min read

TERMINALS OF ECU

CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Remove the main body ECU (multiplex network body ECU).

Click here

*1

Power Distribution Box Assembly

*2

Main Body ECU (Multiplex Network Body ECU)

(b) Reconnect the power distribution box assembly connectors.

Click here

(c) Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

MB-13 (GND1) - Body ground

Ground

Always

Below 1 Ω

MB-26 (BECU) - Body ground

Auxiliary battery power supply

Ignition switch off

11 to 14 V

MB-27 (IGR) - Body ground

IG power supply

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

(d) Install the main body ECU (multiplex network body ECU).

Click here

(e) Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

8B-2 - Body ground

Mirror heater drive signal

Ignition switch ON, rear window defogger switch off

Below 1 V

Ignition switch ON, rear window defogger switch on

11 to 14 V

CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

Click here

AIR CONDITIONING CONTROL ASSEMBLY

Click here