Terminals Of Ecu
TERMINALS OF ECU
CHECK MOBILE WIRELESS CHARGER CRADLE ASSEMBLY
Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
I213-1 (PGND) - Body ground |
Ground |
Always |
Below 1 Ω |
I213-2 (ILL-) - Body ground |
Ground |
Always |
Below 1 Ω |
I213-5 (ACC) - Body ground |
Power source (ACC) |
Ignition switch ON (ACC) |
11 to 14 V |
Ignition switch off |
Below 1 V |
||
I213-6 (B+) - Body ground |
Power source (+B) |
Ignition switch off |
11 to 14 V |
I213-7 (TAIL) - Body ground |
Illumination signal |
Light control switch in off position |
Below 1 V |
Ignition switch off, light control switch in tail or head position |
11 to 14 V |
||
I213-8 (DIS) - Body ground |
Charging suspension signal |
For 1 seconds after turning ignition switch from off to ON (ACC)*1 |
4.5 to 6.0 V |
Device being charged |
Below 1 V |
||
Charging suspended due to smart key system status*2 |
4.5 to 6.0 V |
- *1: When the ignition switch is turned from off to ON (ACC), the mobile wireless charger cradle assembly monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the ignition switch is turned from off to ON (ACC) again.
- *2: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.
Click here
.gif)