Audio & Visual & Telematics
Utility
In this manual: Audio & Visual & Telematics
~1min read
UTILITY
HINT:
- With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS
- You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
ALL READINESS
(a) Clear the DTCs even if no DTCs are stored.
Body Electrical > Clearance Warning > Clear DTCs(b) Turn the ignition switch off and wait for 2 minutes or more.
(c) Turn the ignition switch to ON.
(d) Perform the DTC judgment driving pattern to run the DTC judgment.
(e) Enter the following menus:
Body Electrical > Clearance Warning > UtilityAll Readiness
(f) Input the DTCs to be confirmed.
(g) Check the DTC judgment result.
GTS Display | Description |
|---|---|
| If the judgment result shows Incomplete, perform the DTC confirmation driving pattern again. | |
Normal |
|
Abnormal |
|
Incomplete |
|
(h) Turn the ignition switch off.
Was this page helpful?