Diagnostics

Inspection procedure

4steps
~24min
2/5difficulty
Done 0 of 4
1 Check operation(starter)
  1. Check that the starter operates normally and that the engine starts.
2 Input signal check
2 Input signal check
Toyota Corolla. Input signal check
  1. See input signal check on page 05–745.
  2. check the indicator light when shifting into except d position.

    Ok: the indicator light goes off when shifting into except d position.

    3 Inspect terminal voltage(d)
3 Inspect terminal voltage(d)
Toyota Corolla. Inspect terminal voltage
  1. Turn the ignition switch to on.
  2. measure voltage between terminal 4 (d) of cruise control ecu assy connector and body ground when shifting into d position and other positions.

    Ok:

    4 Check harness and connector(between cruise control ecu assy
4 Check harness and connector(between cruise control ecu assy and park/neutral position switch)
  1. Check for open and short circuit in harness and connector between cruise control ecu assy and park/ neutral position switch
Check and replace cruise control ecu assy
Check and replace cruise control ecu assy

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.