Maintenance
Body
In this manual: Maintenance
~1min read
ON-VEHICLE INSPECTION
1. Canada: TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
(a) Where necessary, tighten all the parts of the chassis.
- Front axle and suspension
- Drive train
- Rear axle and suspension
- Brake system
- Engine mounting, etc.
(b) Where necessary, tighten all the parts of the body.
- Seat belt system
- Seats
- Doors and hood
- Body mountings
- Fuel tank
- Exhaust pipe system, etc.
2. REPLACE AIR CONDITIONING FILTER
(a) Remove the glove compartment assembly. (b) Remove the filter case by holding both sides. (c) Remove the filter from the filter case. (d) Replace the filter with a new one.(e) The installation is in the reverse order of the removal.
Was this page helpful?