Maintenance and care
Brake fluid
In this manual: Maintenance and care
~1min read
Checking fluid level

Adding fluid
Brake fluid can absorb moisture from the air
Warning
When filling the reservoir
Notice
If the fluid level is low or high
The brake fluid level should be between the “max” and “min” lines on the tank.

Adding fluid
Make sure to check the fluid type and prepare the necessary item.
| Fluid type | Fmvss no.116 Dot 3 or sae j1703 brake fluid |
| Item | Clean funnel |
Excess moisture in the brake fluid can cause a dangerous loss of braking efficiency.
Use only newly opened brake fluid.
When filling the reservoir
Take care as brake fluid can harm your hands and eyes and damage painted surfaces.
If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately.
If you still experience discomfort, see a doctor.
If the fluid level is low or high
It is normal for the brake fluid level to go down slightly as the brake pads wear out or when the fluid level in the accumulator is high.
If the reservoir needs frequent refilling, there may be a serious problem.
Was this page helpful?