Exterior/interior trim
Front door belt moulding ASSY LH
In this manual: Exterior/interior trim
~1min read
REPLACEMENT
HINT:
- The installation procedures are the removal procedures in reverse order.
- Use the same procedures for the RH side and LH side.
1. REMOVE POWER WINDOW REGULATOR SWITCH ASSY (See page 75-6 )
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH (See page 75-6 )
3. REMOVE DOOR PULL HANDLE (See page 75-6 )
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH (See page 75-6 )
5. REMOVE FRONT DOOR BELT MOULDING ASSY LH

(a) Remove the screw. (b) Put protective tape under the moulding.
(c) Using a moulding remover or scraper, remove the moulding.
Was this page helpful?