Communication system
Horn system
In this manual: Communication system
~1min read
LOCATION

INSPECTION
1. INSPECT RELAY (HORN)

(a) Remove the HORN relay from the engine room J/B.
(b) Measure the HORN relay resistance.
Standard:

2. INSPECT HIGH PITCHED HORN ASSY

(a) Check operation of the horn.
Standard:

If the result is not as specified, replace the horn assy.
3. INSPECT LOW PITCHED HORN ASSY

(a) Check operation of the horn.
Standard:

If the result is not as specified, replace the horn assy.
Was this page helpful?