For safety and security
Installation with latch system
In this manual: For safety and security
2steps
~12min
1/5difficulty
Done 0 of 2
- Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock position (most upright position). Move the seat as far back as possible.
If your child restraint system interferes with a head restraint and cannot be installed properly, install the child restraint system after removing the head restraint.
- Widen the gap between the seat cushion and seatback slightly.
- Type a

- Latch the hooks of the lower straps onto the latch anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
For owners in canada: the symbol on a child restraint system indicates the presence of a lower connector system.

- Type b
- Latch the buckles onto the latch anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
For owners in canada: the symbol on a child restraint system indicates the presence of a lower connector system.

Was this page helpful?