When trouble arises
Installing the spare tire
In this manual: When trouble arises
~1min read
- Remove any dirt or foreign matter from the wheel contact surface.
If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off.

- Install the spare tire and loosely tighten each wheel nut by hand by approximately the same amount.
- Vehicles with a compact spare tire
Tighten the nuts until the tapered portion comes into loose contact with the disc wheel seat.

- Vehicles with a full-size spare tire
Turn the nuts until the washers come into contact with the wheel.

- Lower the vehicle.

- Firmly tighten each wheel nut two or three times in the order shown in the illustration.
Tightening torque: 76 ft•lbf (103 n•m.5 Kgf•m)

Was this page helpful?