Heater & air conditioner

Rear heater blower switch

~1min read

REPLACEMENT

HINT: Installation is in the reverse order of removal.

1. REMOVE DECK SIDE TRIM COVER FRONT LH

REMOVE DECK SIDE TRIM COVER FRONT LH

(a) Using a thin flat-head screwdriver with the tip taped up with protective tape, disengage the 2 claw fittings and remove the deck side trim cover front.

2. REMOVE DECK SIDE TRIM COVER RH

REMOVE DECK SIDE TRIM COVER RH

(a) Remove the bolt. (b) Release the 2 clip fittings and 2 claw fittings.

(c) Remove the connector and deck side trim cover RH.

3. REMOVE REAR HEATER BLOWER SWITCH

REMOVE REAR HEATER BLOWER SWITCH

(a) Remove the 2 screws and rear heater blower switch.