When trouble arises
Starting the engine
In this manual: When trouble arises
4steps
~24min
2/5difficulty
Done 0 of 4
- Ensure that the shift lever is in p and depress the brake pedal.
- Touch the toyota emblem side of the electronic key to the engine switch. When the electronic key is detected, a buzzer sounds and the engine switch will turn to ignition on mode.
When the smart key system is deactivated in customization setting, the engine switch will turn to accessory mode.

- Firmly depress the brake pedal. Vehicles with monochrome display: check that
is shown on the
multi-information display.Vehicles with color display: check that
and a message are
shown on the multi-information display. - Press the engine switch.
In the event that the engine still cannot be started, contact your toyota dealer.
Shift the shift lever to p and press the engine switch as you normally do when stopping the engine.
Replacing the key batteryAs the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted.
Changing engine switch modesRelease the brake pedal and press the engine switch in step 3 above.
The engine does not start and modes will be changed each time the switch is pressed.
When the electronic key does not work properly- Make sure that the smart key system has not been deactivated in the customization setting. If it is off, turn the function on.
(Customizable features )
Was this page helpful?