Driving
The rear cross traffic alert function detection areas
In this manual: Driving
~2min read
The areas that vehicles can be detected in are outlined below.

To give the driver a more consistent time to react, the buzzer can alert for faster vehicles from farther away.
Example:

The rear cross traffic alert function is operational when
- The bsm main switch is set to on.
- The shift lever is in r.
- Vehicle speed is less than approximately 8 km/h.
- Approaching vehicle speed is between approximately 8 km/h and 28 km/h.
The rear cross traffic alert function is not designed to detect the following types of vehicles and/or objects.
- Small motorcycles, bicycles, pedestrians etc.*
- Vehicles approaching from directly behind
- guardrails, walls, signs, parked vehicles and similar stationary objects*
- vehicles moving away from your vehicle
- vehicles approaching from the parking spaces next to your vehicle*
- vehicles backing up in the parking space next to your vehicle*
*: depending on conditions, detection of a vehicle and/or object may occur.
Conditions under which the rear cross traffic alert function may not function correctlyThe rear cross traffic alert function may not detect vehicles correctly in the following conditions:
- when ice or mud etc. Is attached to the rear bumper
- during bad weather such as heavy rain, fog, snow etc.
- When multiple vehicles approach continuously
- shallow angle parking
- when a vehicle is approaching at high speed
- when parking on a steep incline, such as hills, a dip in the road etc.
- Directly after the bsm main switch is set to on
- directly after the engine is started with the bsm main switch on
- when towing a trailer
- vehicles that the sensors cannot detect because of obstacles

Was this page helpful?